Copper Specifications
- This copper is premium, high quality material.
- Copper Density is 99.9% CU110-anneal (dead soft)
- ASTM-B152
- It is non-coated, has a bare commercial finish.
-
22 Mil (.0216 inches, 24 gauge, 16 Oz) Copper Foils are often used in a number of flashing applications. Commonly referred to as "roofing flashing" or "roofing copper" It is the preferred thickness for many roofing and flashing projects as well as DIY projects, electrical applications, and R&D. It can be shaped by hand but metal snips are needed to cut it.
-
0.7 Mil Copper Foil also referred to as half-ounce copper is used extensively in electrical applications.
Key Features
- .7 Mil (.0007" inches)
- ½ Oz Copper – 110 annealed (dead soft)
- ASTM-B152
- Min 99.9% CU
- Sold as 12 Lb. Rolls
-
Pure Copper Tacks feature a flat head, sharp point, tapered body, and an angular cut shank to resist pull-out.
- CU 110 (99.9%)
-
Other Foils - For R&D Projects that are in the testing phase or short run projects, we hold the following Mils in inventory for quick turn-around.
- Half Ounce Copper Foil .7 Mil (.0007" x 12" wide)
- 4 Mil PSA (Pressure Sensitive Adhesive;.004" x 12" wide x 36" long)
- .005 inch (.005" x 2" wide).
-
Conductive Copper Tape consists of a .0014" (1.4 mil) thick 110 annealed electrolytic tough pitch copper that is highly conductive backed by a 2 Mil electrically conductive acrylic transfer adhesive. This copper adhesive tape is designed for laminating to a variety of surfaces including painted surfaces, metals, and various plastic films. It features good chemical resistance and has moderate tack and high shear strength.
- Adhesive thickness: 2 Mils.
- Width: 3"
- Liner type: 76# Polycoated.
- Peel adhesion (PSTC - 101/180°)
- Initial to SS (20 min @ RT) — Oz./Inch: 47 & N/25mm: 13.2.
- Holding power (PSTC 107 Mod./178°) 2.2 PSI (1" x 1" x 1000g) @ RT — ≥ 600 min.
- Volume resistivity (ASTM D2739-97 Modified): 0.06Ω·m
- Observed resistance (ASTM D2739-97 Modified): 5m Ω
-
This is high quality 16 Mil Copper Foils (.016) and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.
Copper Specifications
- 16 Mil (.016 inches,12 oz/sq ft, 26 gauge) Rolled Copper Foil
- 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
- ASTM-B152
- Min 99.9% CU
Key Features
- Can be formed by hand and will hold weight.
- Cuts with tin snips or shears.
- Used for roofing projects, flashing, cupolas, and other outdoor projects.
- It is durable.
- Often used in outside craft projects and jewelry making.
-
Nimrod Copper Grab Bag! The Nimrod Copper Grab bag is a great value to crafters who need odd-size pieces of copper for the low price of $29.00 USD. If you are an incidental copper user, this grab-bag of copper foil is perfect for your ad hoc projects. Each Nimrod Copper Grab Bag contains about 1-2 lbs of copper squares, strips, odd shaped pieces, and cut-offs. Some of the copper is beginning to develop a patina or has an annealing stain, while some is just bent, wrinkled or dinged.
-
Copper Nails are best described as having a large, flat head, annular ring and diamond points. They are frequently used on projects such as roof flashing and other roofing installations.
- Pure Copper
- CU110 (99.9%)
- Flat Head
- 11 Gauge
