- CU 110 (99.9%)
-
Pure Copper Tacks feature a flat head, sharp point, tapered body, and an angular cut shank to resist pull-out.
-
Copper Nails are best described as having a large, flat head, annular ring and diamond points. They are frequently used on projects such as roof flashing and other roofing installations.
- Pure Copper
- CU110 (99.9%)
- Flat Head
- 11 Gauge
-
No need to try cutting down your own sheets, we save you the time and hassle. Pre-cut copper foil sheets are ideal for a variety of applications including hobby projects, crafts, architecture, engineering, medical equipment and more. They are a highly malleable and ductile metal, a good conductor of heat and electricity, and used significantly in industrial, commercial and personal applications. Pre-cut copper sheets are great for many DIY projects as it is malleable but yet firm.
- 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
- ASTM-B152
- Min 99.9% CU
-
This is high quality 5 Mil Copper Foil and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.
Copper Specifications
- 5 Mil (.005 inch, 36 gauge) Rolled Copper Foil
- 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
- ASTM-B152
- Min 99.9% CU density
Key Features
- 10 times thicker than household aluminum foil.
- Cuts with household scissors, extremely pliable.
- Excellent for tooling and will dent easily with a light touch but will not hold its shape under pressure.
- Create designs by emboss drawing, denting, piercing, rub-transferring, tracing, origami, and hammering (Repousse).
- Has a wide range of applications based on workability and beauty.
-
This is high quality 1 Mil (.001 inch) Rolled Copper Foil and has a wide range of applications based on conductivity, corrosion resistance, workability and beauty. Available in widths of 6", 12" and 18" and lengths of 5 ft, 10 ft, 20 ft and 50 ft.
Copper Specifications
- 1 Mil (.001 inch) Rolled Copper Foil
- 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
- ASTM-B152
- Min 99.9% CU density
Key Features
- Approximately 2 times as thick as an average household aluminum foil (i.e., .0005") or approximately 25% the thickness of a sheet of copier paper (.004").
- Easy to cut with scissors or paper cutter.
- Tears by hand.
- Dead soft, very pliable.
- Very thin. Similar in thickness to extra heavy-duty aluminum foil. If this were glued to wood, the grain and imperfections in the wood will show through the copper.
- Often used for punching, scrapbooking, and other papercrafts.
- Veneer work.
- Has a wide range of applications based on workability and beauty.
-
Nimrod Copper Grab Bag! The Nimrod Copper Grab bag is a great value to crafters who need odd-size pieces of copper for the low price of $29.00 USD. If you are an incidental copper user, this grab-bag of copper foil is perfect for your ad hoc projects. Each Nimrod Copper Grab Bag contains about 1-2 lbs of copper squares, strips, odd shaped pieces, and cut-offs. Some of the copper is beginning to develop a patina or has an annealing stain, while some is just bent, wrinkled or dinged.
-
This is high quality 6 Mil Copper Foil (.006) and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.
Copper Specifications
- 6 Mil (.006 inch, approx 34 gauge) Rolled Copper Foil
- 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
- ASTM-B152
- Min 99.9% CU
Key Features
- Approximately 1.5 times as thick as copier paper.
- More sturdy than 5 Mil copper foil but still retains pliabilty.
- Cuts with scissors or paper cutter.
- Can be hammered, texturized or punched.
- Used for many outside or inside projects.
- A good substitute for 5 Mil when a thicker material is desired.
- A good substitute for 7 Mil when a thinner material is required.
- There are many applications based on workability and beauty.
-
This is high quality 7 Mil Copper Foil (.007) with a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.
Copper Specifications
- 7 Mil (.007 inch, approx 33 gauge) Rolled Copper Foil
- 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
- ASTM-B152
- Min 99.9% CU
Key Features
- Thinner than the thickness of two sheets of copier paper and sturdier than 5 Mil copper foil but retaining pliabilty.
- Cuts with scissors or paper cutter.
- Can be hammered, texturized or punched.
- Used for many outside or inside projects.
- A good substitute for 5 Mil when just a little more thickness is desired or on the other hand, a good substitute for 8 Mil when just a little more thinnest is required.
-
This is high quality 8 Mil Copper Foil (.008) with a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.
Copper Specifications
- 8 Mil (.008 inch, 32 gauge) Rolled Copper Foil
- 110-anneal (Electrolytic Tough Pitch or ETP) dead soft
- ASTM-B152
- Min 99.9% CU
Key Features
- Twice as thick as two sheets of copier paper.
- More sturdy than 7 Mil copper foil but still retaining pliabilty.
- Cuts with scissors or paper cutter.
- Can be hammered, texturized or punched.
- Used for many outside or inside projects.
- A good substitute for 7 Mil when just a little thicker material is desired.
- A good substitute for 10 Mil when just a little thinner material is required.
- There are many applications based on workability and beauty.
-
This is high quality 3 Mil (.003 inch) Rolled Copper Foil and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.
Copper Specifications
- 3 Mil (.003 inch) Rolled Copper
- 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
- ASTM-B152
- Min 99.9% CU
Key Features
- Approximately 6 times as thick as average household aluminum foil (i.e., .0005") or approximately 3/4 the thickness of a sheet of copier paper (.004").
- Easy to cut with scissors or paper cutter.
- Does not tear by hand.
- Dead soft, very pliable.
- Thick enough, so when glued to a backing-board, wood grain does not show through.
- 3 Mil is excellent for tooling and will dent easily with a light touch but will not hold its shape under pressure.
- Create designs by emboss drawing, denting, punching, piercing, rub-transferring, tracing, origami, and hammering (Repousse).
- Veneer work, furniture.
- Scrap booking.
-
4 Mil Gauge Copper Foil, Pre-Cut Copper Sheets and 25 lb. Bulk Rolls can all be purchased here at Nimrod Copper. 4 Mil Copper Foil (.004) is high quality copper used extensively for manufacturing and R&D projects. It has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.
Copper Specifications
- 4 Mil (.004 inch) Rolled Copper
- 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
- ASTM-B152
- Min 99.9% CU
Key Features
- Approximately 7-8 times as thick as average household aluminum foil (i.e., .0005") or approximately the thickness of a sheet of copier paper (.004").
- A good choice when 5 mil (.005") seems a little too thick or heavy.
- Easy to cut with scissors or paper cutter.
- Does not tear by hand.
- Dead soft, very pliable.
- Art work, wall hanging, etc.
-
This is high quality 10 Mil Copper Foil (.01) has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.
Copper Specifications
- 10 Mil (.010 inches, 30 gauge) Rolled Copper
- 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
- ASTM-B152
- Min 99.9% CU
Key Features
- Approximately 2.5 times thicker than a sheet of copier paper (.004").
- Pliable enough to bend into 90-degree angles by hand yet holds its shape.
- Cuts with heavy-duty scissors.
- It can be hammered or texturized.
- Used in many quality craftworks, such as, jewelry making, outdoor/garden projects, especially to protect wood.
- Used in covering furniture or as an inset for wooden cabinets. Indoor waterfalls, sculpture, home, etc.
