2 Mil Copper Foils (.002)

$68.00 – $729.00

2 Mil Copper Foils (.002) is a high quality copper that offers a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

2 Mil (.002 inch) Rolled Copper
110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
ASTM-B152
Min 99.9% CU

Key Features

Approximately 4 times as thick as average household aluminum foil (i.e., .0005") or approximately half the thickness of a sheet of copier paper (.004"). Easy to cut with scissors or paper cutter.
Does not tear by hand.
Dead soft, very pliable.
Thick enough, so when glued to a backing-board, wood grain does not show through.
Often used for punching, scrapbooking and other paper crafts.
Veneer work.
Has a wide range of applications based on workabilty and beauty.

View Cart

Select options / Details

5 Mil Copper Foils (.005)

$37.00 – $448.00

This is high quality 5 Mil Copper Foil and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

5 Mil (.005 inch, 36 gauge) Rolled Copper Foil
110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
ASTM-B152
Min 99.9% CU density

Key Features

10 times thicker than household aluminum foil.
Cuts with household scissors, extremely pliable.
Excellent for tooling and will dent easily with a light touch but will not hold its shape under pressure.
Create designs by emboss drawing, denting, piercing, rub-transferring, tracing, origami, and hammering (Repousse).
Has a wide range of applications based on workability and beauty.

View Cart

Select options / Details

This is high quality 1 Mil (.001 inch) Rolled Copper Foil and has a wide range of applications based on conductivity, corrosion resistance, workability and beauty. Available in widths of 6", 12" and 18" and lengths of 5 ft, 10 ft, 20 ft and 50 ft.

Copper Specifications

1 Mil (.001 inch) Rolled Copper Foil
110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
ASTM-B152
Min 99.9% CU density

Key Features

Approximately 2 times as thick as an average household aluminum foil (i.e., .0005") or approximately 25% the thickness of a sheet of copier paper (.004").
Easy to cut with scissors or paper cutter.
Tears by hand.
Dead soft, very pliable.
Very thin. Similar in thickness to extra heavy-duty aluminum foil. If this were glued to wood, the grain and imperfections in the wood will show through the copper.
Often used for punching, scrapbooking, and other papercrafts.
Veneer work.
Has a wide range of applications based on workability and beauty.

View Cart

Select options / Details

6 Mil Copper Foils (.006)

$40.00 – $461.00

This is high quality 6 Mil Copper Foil (.006) and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

6 Mil (.006 inch, approx 34 gauge) Rolled Copper Foil
110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
ASTM-B152
Min 99.9% CU

Key Features

Approximately 1.5 times as thick as copier paper.
More sturdy than 5 Mil copper foil but still retains pliabilty.
Cuts with scissors or paper cutter.
Can be hammered, texturized or punched.
Used for many outside or inside projects.
A good substitute for 5 Mil when a thicker material is desired.
A good substitute for 7 Mil when a thinner material is required.
There are many applications based on workability and beauty.

View Cart

Select options / Details

4 Mil Copper Foils (.004)

$50.00 – $618.00

4 Mil Gauge Copper Foil, Pre-Cut Copper Sheets and 25 lb. Bulk Rolls can all be purchased here at Nimrod Copper. 4 Mil Copper Foil (.004) is high quality copper used extensively for manufacturing and R&D projects. It has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

4 Mil (.004 inch) Rolled Copper
110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
ASTM-B152
Min 99.9% CU

Key Features

Approximately 7-8 times as thick as average household aluminum foil (i.e., .0005") or approximately the thickness of a sheet of copier paper (.004").
A good choice when 5 mil (.005") seems a little too thick or heavy.
Easy to cut with scissors or paper cutter.
Does not tear by hand.
Dead soft, very pliable.
Art work, wall hanging, etc.

View Cart

Select options / Details

3 Mil Copper Foils (.003)

$48.00 – $673.00

This is high quality 3 Mil (.003 inch) Rolled Copper Foil and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

3 Mil (.003 inch) Rolled Copper
110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
ASTM-B152
Min 99.9% CU

Key Features

Approximately 6 times as thick as average household aluminum foil (i.e., .0005") or approximately 3/4 the thickness of a sheet of copier paper (.004").
Easy to cut with scissors or paper cutter.
Does not tear by hand.
Dead soft, very pliable.
Thick enough, so when glued to a backing-board, wood grain does not show through.
3 Mil is excellent for tooling and will dent easily with a light touch but will not hold its shape under pressure.
Create designs by emboss drawing, denting, punching, piercing, rub-transferring, tracing, origami, and hammering (Repousse).
Veneer work, furniture.
Scrap booking.

View Cart

Select options / Details

Pre-Cut Copper Foil Sheets

$34.00 – $145.00

No need to try cutting down your own sheets, we save you the time and hassle. Pre-cut copper foil sheets are ideal for a variety of applications including hobby projects, crafts, architecture, engineering, medical equipment and more. They are a highly malleable and ductile metal, a good conductor of heat and electricity, and used significantly in industrial, commercial and personal applications. Pre-cut copper sheets are great for many DIY projects as it is malleable but yet firm.

110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
ASTM-B152
Min 99.9% CU

View Cart

Select options / Details

10 Mil Copper Foils (.01)

$59.00 – $487.00

This is high quality 10 Mil Copper Foil (.01) has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

10 Mil (.010 inches, 30 gauge) Rolled Copper
110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
ASTM-B152
Min 99.9% CU

Key Features

Approximately 2.5 times thicker than a sheet of copier paper (.004").
Pliable enough to bend into 90-degree angles by hand yet holds its shape.
Cuts with heavy-duty scissors.
It can be hammered or texturized.
Used in many quality craftworks, such as, jewelry making, outdoor/garden projects, especially to protect wood.
Used in covering furniture or as an inset for wooden cabinets. Indoor waterfalls, sculpture, home, etc.

View Cart

Select options / Details

8 Mil Copper Foils (.008)

$47.00 – $461.00

This is high quality 8 Mil Copper Foil (.008) with a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

8 Mil (.008 inch, 32 gauge) Rolled Copper Foil
110-anneal (Electrolytic Tough Pitch or ETP) dead soft
ASTM-B152
Min 99.9% CU

Key Features

Twice as thick as two sheets of copier paper.
More sturdy than 7 Mil copper foil but still retaining pliabilty.
Cuts with scissors or paper cutter.
Can be hammered, texturized or punched.
Used for many outside or inside projects.
A good substitute for 7 Mil when just a little thicker material is desired.
A good substitute for 10 Mil when just a little thinner material is required.
There are many applications based on workability and beauty.

View Cart

Select options / Details

1.4 Mil Copper Foils (.0014)

$63.00 – $829.00

1.4 Mil (.0014 inch) Rolled Copper used extensively in electrical Applications. This is high quality copper foil and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty. Also known as "One Ounce Copper," due to the fact that one square foot weights 1 Ounce.

Copper Specifications

110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
ASTM-B152
Min 99.9% CU

Key Features

Approximately 3 times as thick as average household aluminum foil (i.e., .0005") or approximately half the thickness of a sheet of copier paper (.004").
Easy to cut with scissors or paper cutter.
Does not tear by hand.
Dead soft, very pliable.
Thick enough, so when glued to a backing-board, wood grain does not show through.
Often used for punching, scrapbooking and other paper crafts.
Veneer work.
Has a wide range of applications based on workabilty and beauty.

View Cart

Select options / Details

7 Mil Copper Foils (.007)

$46.00 – $466.00

This is high quality 7 Mil Copper Foil (.007) with a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

7 Mil (.007 inch, approx 33 gauge) Rolled Copper Foil
110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
ASTM-B152
Min 99.9% CU

Key Features

Thinner than the thickness of two sheets of copier paper and sturdier than 5 Mil copper foil but retaining pliabilty.
Cuts with scissors or paper cutter.
Can be hammered, texturized or punched.
Used for many outside or inside projects.
A good substitute for 5 Mil when just a little more thickness is desired or on the other hand, a good substitute for 8 Mil when just a little more thinnest is required.

View Cart

Select options / Details

Bulk Copper Rolls

$448.00 – $892.00

Copper rolls are available in 12, 25, and 50-pound rolls. Please note that only .7 Mil copper is available in 12 lb. rolls. All other rolls are 25 pounds. 16 and 22 Mil gauge features 25 and 50-pound rolls.

View Cart

Select options / Details

22 Mil Copper Foils (.022)

$857.00

22 Mil (.0216 inches, 24 gauge, 16 Oz) Copper Foils are often used in a number of flashing applications. Commonly referred to as "roofing flashing" or "roofing copper" It is the preferred thickness for many roofing and flashing projects as well as DIY projects, electrical applications, and R&D. It can be shaped by hand but metal snips are needed to cut it.

Copper Specifications

This copper is premium, high quality material.
Copper Density is 99.9% CU110-anneal (dead soft)
ASTM-B152
It is non-coated, has a bare commercial finish.

22 Mil Copper Foils are available in our standard 50 pound coils (rolls) with a 12" ID Core, so it rolls out pretty smooth. If you purchase 2 or more coils, you get a 5% discount. 100 pound and 200 pound coils are also available but you must email for the quote.

View Cart

Select options / Details

0.7 Mil Copper Foils (.0007)

$607.00

0.7 Mil Copper Foil also referred to as half-ounce copper is used extensively in electrical applications.

Key Features

.7 Mil (.0007" inches)
½ Oz Copper – 110 annealed (dead soft)
ASTM-B152
Min 99.9% CU
Sold as 12 Lb. Rolls

View Cart

Select options / Details

Copper Tacks

$10.00

Pure Copper Tacks feature a flat head, sharp point, tapered body, and an angular cut shank to resist pull-out.

CU 110 (99.9%)

View Cart

Add to cart / Details

Half Ounce (.0007 Mil)

$1,234.00

Other Foils - For R&D Projects that are in the testing phase or short run projects, we hold the following Mils in inventory for quick turn-around.

Half Ounce Copper Foil .7 Mil (.0007" x 12" wide)
4 Mil PSA (Pressure Sensitive Adhesive;.004" x 12" wide x 36" long)
.005 inch (.005" x 2" wide).

All foils are 110 annealed, 99.9% CU Density, and bare commercial finish. Available in 25 pound rolls, 3" ID.

View Cart

Select options / Details

Conductive Copper Tape

$60.00 – $3,320.00

Conductive Copper Tape consists of a .0014" (1.4 mil) thick 110 annealed electrolytic tough pitch copper that is highly conductive backed by a 2 Mil electrically conductive acrylic transfer adhesive. This copper adhesive tape is designed for laminating to a variety of surfaces including painted surfaces, metals, and various plastic films. It features good chemical resistance and has moderate tack and high shear strength.

Adhesive thickness: 2 Mils.
Width: 3"
Liner type: 76# Polycoated.
Peel adhesion (PSTC - 101/180°)
Initial to SS (20 min @ RT) — Oz./Inch: 47 & N/25mm: 13.2.
Holding power (PSTC 107 Mod./178°) 2.2 PSI (1" x 1" x 1000g) @ RT — ≥ 600 min.
Volume resistivity (ASTM D2739-97 Modified): 0.06Ω·m
Observed resistance (ASTM D2739-97 Modified): 5m Ω

View Cart

Select options / Details

16 Mil Copper Foils (.016)

$448.00 – $892.00

This is high quality 16 Mil Copper Foils (.016) and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

16 Mil (.016 inches,12 oz/sq ft, 26 gauge) Rolled Copper Foil
110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
ASTM-B152
Min 99.9% CU

Key Features

Can be formed by hand and will hold weight.
Cuts with tin snips or shears.
Used for roofing projects, flashing, cupolas, and other outdoor projects.
It is durable.
Often used in outside craft projects and jewelry making.

View Cart

Select options / Details

Copper Nails

$29.00

Copper Nails are best described as having a large, flat head, annular ring and diamond points. They are frequently used on projects such as roof flashing and other roofing installations.

Pure Copper
CU110 (99.9%)
Flat Head
11 Gauge

View Cart

Add to cart / Details

Grab Bag

$38.00

Nimrod Copper Grab Bag! The Nimrod Copper Grab bag is a great value to crafters who need odd-size pieces of copper for the low price of $29.00 USD. If you are an incidental copper user, this grab-bag of copper foil is perfect for your ad hoc projects. Each Nimrod Copper Grab Bag contains about 1-2 lbs of copper squares, strips, odd shaped pieces, and cut-offs. Some of the copper is beginning to develop a patina or has an annealing stain, while some is just bent, wrinkled or dinged.

Copper Specifications

Key Features

Copper Specifications

Key Features

Copper Specifications

Key Features

Copper Specifications

Key Features

Copper Specifications

Key Features

Copper Specifications

Key Features

Copper Specifications

Key Features

Copper Specifications

Key Features

Copper Specifications

Key Features

Copper Specifications

Key Features

Copper Specifications

Key Features

Copper Specifications

Key Features

Title