Call us today! 1-866-CUFOILS (1-866-283-6457)

  • View Cart
    Add to cart / Details

    Half Ounce (.0007 Mil)

    $1,234.00
    Other Foils - For R&D Projects that are in the testing phase or short run projects, we hold the following Mils in inventory for quick turn-around.
    • Half Ounce Copper Foil .7 Mil (.0007" x 12" wide)
    • 4 Mil PSA (Pressure Sensitive Adhesive;.004" x 12" wide x 36" long)
    • .005 inch (.005" x 2" wide).
    All foils are 110 annealed, 99.9% CU Density, and bare commercial finish. Available in 25 pound rolls, 3" ID.
  • 0.7 Mil Copper Foil
    View Cart
    Select options / Details

    1.4 Mil Copper Foils (.0014)

    $63.00 – $829.00
    1.4 Mil (.0014 inch) Rolled Copper used extensively in electrical Applications. This is high quality copper foil and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty. Also known as "One Ounce Copper," due to the fact that one square foot weights 1 Ounce.

    Copper Specifications

    • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
    • ASTM-B152
    • Min 99.9% CU

    Key Features

    • Approximately 3 times as thick as average household aluminum foil (i.e., .0005") or approximately half the thickness of a sheet of copier paper (.004").
    • Easy to cut with scissors or paper cutter.
    • Does not tear by hand.
    • Dead soft, very pliable.
    • Thick enough, so when glued to a backing-board, wood grain does not show through.
    • Often used for punching, scrapbooking and other paper crafts.
    • Veneer work.
    • Has a wide range of applications based on workabilty and beauty.
  • View Cart
    Select options / Details

    10 Mil Copper Foils (.01)

    $59.00 – $487.00
    This is high quality 10 Mil Copper Foil (.01) has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

    Copper Specifications

    • 10 Mil (.010 inches, 30 gauge) Rolled Copper
    • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
    • ASTM-B152
    • Min 99.9% CU

    Key Features

    • Approximately 2.5 times thicker than a sheet of copier paper (.004").
    • Pliable enough to bend into 90-degree angles by hand yet holds its shape.
    • Cuts with heavy-duty scissors.
    • It can be hammered or texturized.
    • Used in many quality craftworks, such as, jewelry making, outdoor/garden projects, especially to protect wood.
    • Used in covering furniture or as an inset for wooden cabinets. Indoor waterfalls, sculpture, home, etc.
  • 16 Mil Copper Roll
    View Cart
    Select options / Details

    16 Mil Copper Foils (.016)

    $448.00 – $892.00
    This is high quality 16 Mil Copper Foils (.016) and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

    Copper Specifications

    • 16 Mil (.016 inches,12 oz/sq ft, 26 gauge) Rolled Copper Foil
    • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
    • ASTM-B152
    • Min 99.9% CU

    Key Features

    • Can be formed by hand and will hold weight.
    • Cuts with tin snips or shears.
    • Used for roofing projects, flashing, cupolas, and other outdoor projects.
    • It is durable.
    • Often used in outside craft projects and jewelry making.
  • 0.7 Mil Copper Foil
    View Cart
    Select options / Details

    2 Mil Copper Foils (.002)

    $68.00 – $729.00
    2 Mil Copper Foils (.002) is a high quality copper that offers a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

    Copper Specifications

    • 2 Mil (.002 inch) Rolled Copper
    • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
    • ASTM-B152
    • Min 99.9% CU

    Key Features

    • Approximately 4 times as thick as average household aluminum foil (i.e., .0005") or approximately half the thickness of a sheet of copier paper (.004"). Easy to cut with scissors or paper cutter.
    • Does not tear by hand.
    • Dead soft, very pliable.
    • Thick enough, so when glued to a backing-board, wood grain does not show through.
    • Often used for punching, scrapbooking and other paper crafts.
    • Veneer work.
    • Has a wide range of applications based on workabilty and beauty.
  • 16 Mil Copper Roll
    View Cart
    Select options / Details

    22 Mil Copper Foils (.022)

    $857.00
    22 Mil (.0216 inches, 24 gauge, 16 Oz) Copper Foils are often used in a number of flashing applications. Commonly referred to as "roofing flashing" or "roofing copper"  It is the preferred thickness for many roofing and flashing projects as well as DIY projects, electrical applications, and R&D. It can be shaped by hand but metal snips are needed to cut it.

    Copper Specifications

    • This copper is premium, high quality material.
    • Copper Density is 99.9% CU110-anneal (dead soft)
    • ASTM-B152
    • It is non-coated, has a bare commercial finish.
    22 Mil Copper Foils are available in our standard 50 pound coils (rolls) with a 12" ID Core, so it rolls out pretty smooth. If you purchase 2 or more coils, you get a 5% discount. 100 pound and 200 pound coils are also available but you must email for the quote.
  • View Cart
    Select options / Details

    3 Mil Copper Foils (.003)

    $48.00 – $673.00
    This is high quality 3 Mil (.003 inch) Rolled Copper Foil and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

    Copper Specifications

    • 3 Mil (.003 inch) Rolled Copper
    • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
    • ASTM-B152
    • Min 99.9% CU

    Key Features

    • Approximately 6 times as thick as average household aluminum foil (i.e., .0005") or approximately 3/4 the thickness of a sheet of copier paper (.004").
    • Easy to cut with scissors or paper cutter.
    • Does not tear by hand.
    • Dead soft, very pliable.
    • Thick enough, so when glued to a backing-board, wood grain does not show through.
    • 3 Mil is excellent for tooling and will dent easily with a light touch but will not hold its shape under pressure.
    • Create designs by emboss drawing, denting, punching, piercing, rub-transferring, tracing, origami, and hammering (Repousse).
    • Veneer work, furniture.
    • Scrap booking.
  • View Cart
    Select options / Details

    4 Mil Copper Foils (.004)

    $50.00 – $618.00
    4 Mil Gauge Copper Foil, Pre-Cut Copper Sheets and 25 lb. Bulk Rolls can all be purchased here at Nimrod Copper. 4 Mil Copper Foil (.004) is high quality copper used extensively for manufacturing and R&D projects. It has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

    Copper Specifications

    • 4 Mil (.004 inch) Rolled Copper
    • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
    • ASTM-B152
    • Min 99.9% CU

    Key Features

    • Approximately 7-8 times as thick as average household aluminum foil (i.e., .0005") or approximately the thickness of a sheet of copier paper (.004").
    • A good choice when 5 mil (.005") seems a little too thick or heavy.
    • Easy to cut with scissors or paper cutter.
    • Does not tear by hand.
    • Dead soft, very pliable.
    • Art work, wall hanging, etc.
  • View Cart
    Select options / Details

    5 Mil Copper Foils (.005)

    $37.00 – $448.00
    This is high quality 5 Mil Copper Foil and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

    Copper Specifications

    • 5 Mil (.005 inch, 36 gauge) Rolled Copper Foil
    • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
    • ASTM-B152
    • Min 99.9% CU density

    Key Features

    • 10 times thicker than household aluminum foil.
    • Cuts with household scissors, extremely pliable.
    • Excellent for tooling and will dent easily with a light touch but will not hold its shape under pressure.
    • Create designs by emboss drawing, denting, piercing, rub-transferring, tracing, origami, and hammering (Repousse).
    • Has a wide range of applications based on workability and beauty.
  • View Cart
    Select options / Details

    6 Mil Copper Foils (.006)

    $40.00 – $461.00
    This is high quality 6 Mil Copper Foil (.006) and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

    Copper Specifications

    • 6 Mil (.006 inch, approx 34 gauge) Rolled Copper Foil
    • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
    • ASTM-B152
    • Min 99.9% CU

    Key Features

    • Approximately 1.5 times as thick as copier paper.
    • More sturdy than 5 Mil copper foil but still retains pliabilty.
    • Cuts with scissors or paper cutter.
    • Can be hammered, texturized or punched.
    • Used for many outside or inside projects.
    • A good substitute for 5 Mil when a thicker material is desired.
    • A good substitute for 7 Mil when a thinner material is required.
    • There are many applications based on workability and beauty.
  • View Cart
    Select options / Details

    7 Mil Copper Foils (.007)

    $46.00 – $466.00
    This is high quality 7 Mil Copper Foil (.007) with a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

    Copper Specifications

    • 7 Mil (.007 inch, approx 33 gauge) Rolled Copper Foil
    • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
    • ASTM-B152
    • Min 99.9% CU

    Key Features

    • Thinner than the thickness of two sheets of copier paper and sturdier than 5 Mil copper foil but retaining pliabilty.
    • Cuts with scissors or paper cutter.
    • Can be hammered, texturized or punched.
    • Used for many outside or inside projects.
    • A good substitute for 5 Mil when just a little more thickness is desired or on the other hand, a good substitute for 8 Mil when just a little more thinnest is required.
  • View Cart
    Select options / Details

    8 Mil Copper Foils (.008)

    $47.00 – $461.00
    This is high quality 8 Mil Copper Foil (.008) with a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

    Copper Specifications

    • 8 Mil (.008 inch, 32 gauge) Rolled Copper Foil
    • 110-anneal (Electrolytic Tough Pitch or ETP) dead soft
    • ASTM-B152
    • Min 99.9% CU

    Key Features

    • Twice as thick as two sheets of copier paper.
    • More sturdy than 7 Mil copper foil but still retaining pliabilty.
    • Cuts with scissors or paper cutter.
    • Can be hammered, texturized or punched.
    • Used for many outside or inside projects.
    • A good substitute for 7 Mil when just a little thicker material is desired.
    • A good substitute for 10 Mil when just a little thinner material is required.
    • There are many applications based on workability and beauty.

Title

Note: All information, recommendations, and suggestions contained herein shall only be used as a guide by the Purchaser and not for specification or any other purposes. This information also does not constitute a warranty nor guaranty of any type whatsoever. Purchaser should independently determine suitability of all material purchased and must confirm adaptability and other characteristics by conducting their own tests. Nimrod Copper Inc. shall have no liability as a result of any loss, expense, damage, cost or other injury which results from Purchaser’s reliance on the information.

Copyright 2021 | Nimrod Copper Company
Go to Top